Conductivity readings are widely used for gauging mixture concentrations and chemical compound. It does not measure specific salts but the total combine salts in the liquid, making it the fastest non-destructive test available.
Telpon: (+62-21) 84304918 | (+62-21) 84304853
The Senz TDS 2 is designed for liquid testing where high concentrations of below 10,000 ppm is measured. The Senz TDS 2 is both rugged and accurate. TDS readings are converted from conductivity with the factor of 2 which is an industrial standard for water testing. All readings are temperature compensated to 25ºC, a must for concentrated liquids. The Senz TDS 2 is used to measure condensate, boiler water, swimming pool water and industrial waste control etc.
Precise display of 10 ppm over the scale of 0 to 10,000 ppm.
On activation, the tester calibrates the end-point automatically at prescribed standard solution.
The tester automatically senses a stable end-point reading and freezes it for recording.
Able to freeze display for ease of reading and recording.
The tester beeps at every press of the button and beeps on every completed function and end-point reading.
|Model:||Senz TDS 2|
|Range:||100 to 10,000 ppm|
|Accuracy:||± 2% full scale|
|Calibration Points:||Single point at 6440ppm|
|Battery Type:||4 x 1.5V button cell (Alkaline A76 or equivalent)|
|Battery Life:||Approx. 100 hours|
|Automatic Shut-off:||Approx. 15 minutes|
|Automatic Temperature Compensation:||0 to 50°C or 32 to 122°F|
|Operating Temperature:||0 to 50°C or 32 to 122°F|
|Packaging Dimension Size (LxWxH):||185mm x 65mm x 25mm|
|Packaging Weight:||Approx. 135gm|
|Product Dimension Size (LxWxH):||170mm x 32mm x 15mm|
|Product Weight:||Approx. 70gm|